• Đảm bảo hàng chính hãng
  • Giao hàng toàn quốc
  • Bảo hành tận nhà
  • Giá luôn tốt nhất
Danh mục sản phẩm

Thiết bị kiểm soát ra vào RAC – 940
[giaban] Liên hệ [/giaban]
[tomtat] Mã sản phẩm:   RAC940
Giá bán:            Liên hệ
Bảo Hành:         12 tháng. [/tomtat] [kythuat]
Thiết bị kiểm soát ra vào RAC – 940 với thiết kế phím chuông trên thiết bị, hỗ trợ thẻ và mật mã.Thiết kế nhỏ gọn, ấn tượng với bàn phím cảm ứng và đèn nền màu xanh.

Tính năng
  •  Bell key design. Suit for various location.
  • Support network or standalone operation.
  • Blacklist to prevent unknown usage of lost card.
  • Casing tamper proof detection and door tamper alarm.
  • Support swipe card and card with pin codes enter modes.
  • Unique ID or Block read format supported. (RAC-940PM)
  • Slim, stylish design, sensitive touch keypad with blue backlight.
  • Dynamic control of memory up to 10,000 cardholders (max) / 10,000 events.
  • Built-in RS-232 & RS-485 communication interface to PC.
  • Programmable disarm code and able set maximum attempts to trigger re-swipe card alarm. The controller time-out function will avoid instruction in and has self security.
  • 8 sets siren output. (external connection via ACU-30). Provide 64 holiday schedules per year. (Able input date through software)
  • Able to connect external slave reader, type T1 / T2 / Wiegand. And support anti-passback to each single door.
  • Provide 16 time zones and time schedules, 8 time conditional unlock door schedules. (per week)
  • Display name on the LCD screen after swiped card. Function keys of access control and shifts which convenient to personnel to generate time attendance reports.
  • Memory buffer full warning. When memory capacity reaches 90%, it will send an alarm to remind the system administrator for data collection.
  • On-board lithium battery ensures data storage can reach up to 1 year upon power outage.
Thông số kĩ thuật

Model No.
RAC-940PE
RAC-940PM
Read Format
EM (125 KHz )
Mifare-1 (13.56MHz )
Read Range
8-10 cm (max)
3-5 cm (max )
Slave Reader
T2 or Wiegand ( 1 Set )
Input Ports
3 Sensors (Door Sensor x 1、Exit Button x 1、Case Sensor x 1)
Output Ports
(Built-in )
Relay x 1 ( Door Lock or Bell )
Output Ports
(External)
O.C. Output x 2 ( Door Lock / Alarm or Siren , external ACU-30 )
Cardholders
10,000 (max)
Events
10,000
LED Indicator
Power / Comm.
LCD Display
128 x 64 Dot. Graphic Display with backlight
Keypad
17 Key (F1-F4, 0-9, *, #, Bell) (Waterproof Sensitive Touch Keypad)
Real Time Clock
Yes
Beep Tone
Buzzer
ID Setting
Command setting by keypad
Water-proof
IP X5
Power Input
DC 12V / 1A
Current Consumption
500mA. (max. excluding slave reader)
Comm. Interface
RS-232 / RS-485
Comm. Baudrate
9,600/19,200 bps-N-8-1
Operating Temp.
0° C ~ 55° C / 32° F ~ 131° F
Relative Humidity
20% ~ 80%(Non-condensing)
Dimension
130mm(L) x 100mm(W) x 27mm(H)
Weight (Device)
340g
[/kythuat]